« 4:01 a.m. Bottle Opener Series ('I'd rather have a bottle in front of me than a frontal lobotomy") — Episode 27: S-Biner GetLit | Home | Linx — "Solve the problem with what's in the room" »

February 15, 2013

Print your boat, then sail away

20121103_STP002_0

Long November 3, 2012 story from The Economist short: "Every summer, Seattle holds a raft race in Green Lake, a park that is the eponymous home of the water the rafts must cross. Entries for the Milk Carton Derby have to be made from old plastic milk bottles. The result is a wonderfully Heath-Robinson collection of improvised craft. But this year one stood out: the entry from the University of Washington's engineering department actually looked like a boat. The students who built it, Matthew Rogge, Bethany Weeks and Brandon Bowman, had shredded and melted their bottles, and then used a 3-D printer to print themselves a plastic vessel."

Below, more excerpts from the piece.

No doubt the Milk-Carton-Derby rules will be tightened next year — though in the end, the team came only second. But they did come first in a competition that mattered more. On October 19th they won $100,000 in the 3-D X 4-D Challenge, organized by a charity called techfortrade.

3-D printing is all the rage at the moment. Several varieties of the technique exist, using a wide range of materials as the "ink." One of the most popular methods, though — and the one used by the team — works by extruding a filament of molten plastic. In the case of the team's printer, this plastic was high-density polyethylene from milk bottles. The print head makes repeated passes over the thing being printed, leaving a plastic trail as it does so. It thus builds up a three-dimensional structure.

3-D printing is now taken seriously by manufacturers as an alternative to cutting, bending, pressing, and molding things. It is also a popular hobby among those of a geeky disposition. What it has not been used for so far is to help people in poor countries improve their everyday lives.

Mr. Rogge, Ms. Weeks, and Mr. Bowman intend to employ their prize money to do precisely that. They plan to form a firm that will, in partnership with a charity called Water for Humans, custom-build composting toilets and rainwater collectors. The partnership will look for suitable local entrepreneurs in poor countries and will train them how to build, use and maintain the printers.

The operation will thus run on a commercial basis. But the software that controls the printers will be open-source and available to all, as will many of the designs for things the printers can make. That way, the technology can spread. A trial will begin soon in Oaxaca, Mexico.

The crucial point about the team's printer is that it combines size and cheapness. Printers used by hobbyists are not expensive, but they are small. Many would find it hard to make anything larger than a coffee cup. Those used by engineering companies cost serious money — and even they might balk at printing an object the size of the Milk Carton Derby boat.

The team's printer is built around a second-hand computer-controlled plasma cutter (a device used for carving up sheets of metal). This directs the movement of an extruder that melts flakes of plastic into a thin stream which can be squirted out as required. It is able to create things with dimensions of up to 2.5 meters by 1.2 meters by 1 meter. Appropriately, many of its parts were themselves manufactured on a desktop 3-D printer.

The ink is cheap, too. High-density polyethylene is as common as muck — literally, for a lot of it ends up on refuse tips. Chop it up, though, and it is grist to the mill. Mr, Rogge estimates that if he and his colleagues had printed their boat from commercial plastic filament it would have cost them $800. Instead, 250 clean, empty milk bottles set them back just $3.20.

One of the judges at the 3-D X 4-D Challenge noted that many small vessels in West Africa are made from trees, such as teak, that are becoming scarce. Making them from waste plastic instead would be an environmental twofer: rare species would be conserved and less rubbish thrown away.

Wait a sec... what's that music I'm hearing?

February 15, 2013 at 08:01 AM | Permalink


TrackBack

TrackBack URL for this entry:
http://www.typepad.com/services/trackback/6a00d8341c5dea53ef017ee88779d4970d

Listed below are links to weblogs that reference Print your boat, then sail away:

Comments

I hope commercial production works for them.

Posted by: John A | Feb 16, 2013 5:58:29 PM

The comments to this entry are closed.